Hardware > Overclocking! Tips, Help and Advice

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
<< Prev Next >>

This topic has been autolocked for inactivity. If you have something to add, Click Here to request it is re-opened.

#502609 by unknown[26431] at 2006-01-04 05:48:04 (7 years ago) - [Report]

thanks demagh i am getting the zalman Cu

#503233 by unknown[102179] at 2006-01-04 19:23:17 (7 years ago) - [Report]

Demangh your profile was very helpful.. went from a 2.01 to 2.57 with just a few minor tweeks... : - )

#503239 by unknown[113989] at 2006-01-04 19:26:29 (7 years ago) - [Report]

ok i have a pentium 4 3.0 ghz 800 fsb now i overclocked it to a 3.2ghz but my fsb also went up to 855 just wondering if this is normal? someone please help me out

#504080 by unknown[26431] at 2006-01-05 17:07:13 (7 years ago) - [Report]

hi it is me again with the Diamond Viper X800XL 256MB PCI when i am playing my temp is 80C-90C is that how all
x800xl work or is Diamond shitty? :???:

#504181 by unknown[77969] at 2006-01-05 18:55:28 (7 years ago) - [Report]

qwer wrote:

ok i have a pentium 4 3.0 ghz 800 fsb now i overclocked it to a 3.2ghz but my fsb also went up to 855 just wondering if this is normal? someone please help me out

It's normal.

#504207 by unknown[128337] at 2006-01-05 19:31:49 (7 years ago) - [Report]

Hey!

I want to overclock my Sapphire ATI Radeon x800 GT 128M/256BIT. (PCI-E)
Core - 475 (By default)
Memory - 355 (By default)
Which software do i really need...?
ATITool... or... TRIXX?

- (That overclocking tool is TRIXX)

And sorry for my english... :blush:

#504279 by unknown[77969] at 2006-01-05 20:44:05 (7 years ago) - [Report]

ATI tool.

#504287 by unknown[128337] at 2006-01-05 20:49:58 (7 years ago) - [Report]

Ganth wrote:

ATI tool.

What's the difference between ATITool and TRIXX?

#504414 by unknown[77969] at 2006-01-05 22:35:14 (7 years ago) - [Report]

sCuTTLeRz wrote:

Ganth wrote:

ATI tool.

What's the difference between ATITool and TRIXX?

One is made by ATI and the other isn't?

#504444 by unknown[125453] at 2006-01-05 23:28:24 (7 years ago) - [Report]

ATI tool is not made by ATI but it is the best program to clock a ati card with

its has an very advanced artifact scanning and u have alot of options in ATI tools. U can read more on http://www.techpowerup.com/atitool/

#504468 by unknown[80538] at 2006-01-05 23:59:11 (7 years ago) - [Report]

is there something just as good as atitool for an nvidia card?

#504471 by unknown[128337] at 2006-01-06 00:04:21 (7 years ago) - [Report]

josty2 wrote:

is there something just as good as atitool for an nvidia card?

ATITool wrote:

Major changes to the latest stable version are:

* Added support for NVIDIA video cards
* Addded support for ATI X1000 series
* Added voltage control for ATI X1800
* Added current draw monitoring for ATI X1800
* Fan & Voltage settings can be saved to a profile now

#504498 by unknown[80538] at 2006-01-06 00:35:03 (7 years ago) - [Report]

sCuTTLeRz wrote:

josty2 wrote:

is there something just as good as atitool for an nvidia card?

ATITool wrote:

yes, i read that, but i can't really call it stable on my pc :-/

, don't know if it is me or my nvidia...
cause atitool left me sitting there 3 times when setting some things in 5 minutes... so
i wasn't very pleased

#504622 by unknown[77969] at 2006-01-06 03:04:00 (7 years ago) - [Report]

josty2 wrote:

is there something just as good as atitool for an nvidia card?

coolbits?

#504623 by unknown[28578] at 2006-01-06 03:08:02 (7 years ago) - [Report]

riva tuner is arguably the best Overclocker for nVidia cards.

#505855 by benknackan (Power User) at 2006-01-07 10:27:36 (7 years ago) - [Report]

This image has been resized, click here to view the full-sized image.

I think I could go higher but memory holding it back I'd have to step down to 133 then. I'd guess it's better to leave it @ this then... Temp = same as when on stock speed. Aka 30-31 during absolute no load, 32-34 when regural load or idle. 42-43 during 100 % load, All temps in C. And yeah cpu cooler runs @ 60 % capacity during full load

. Atleast it's clocked over the 4800+ and beats it's comparision marks in Sisoft, saved me a few hundred �

Also is there any proggie that could make me available to set the memory on something between 166 and 133 ? .

Last edited by benknackan at 2006-01-07 10:29:25

#506071 by demagh (User) at 2006-01-07 15:39:55 (7 years ago) - [Report]

benknackan wrote:

Also is there any proggie that could make me available to set the memory on something between 166 and 133 ? .

that's motherboard dependant, some motherboards got 200-166-133-100

others got 200-183-166-150-133-120-100

#506096 by benknackan (Power User) at 2006-01-07 16:11:05 (7 years ago) - [Report]

okey too bad... I'm still happy how it runs soo

Also other motherboards I believe that it's only DFI that have those extra options to set memory I believe.

#510753 by Tancoll (Power User) at 2006-01-12 09:10:16 (7 years ago) - [Report]

benknackan wrote:

Also is there any proggie that could make me available to set the memory on something between 166 and 133 ? .

Yes.. Good programs for clocking an AMD socket 939 is Clockgen and A64 Tweaker.

In Clockngen you can change FSB/HTT, Multiplier, Voltage to CPU and much more. A64 Tweaker is for the memorys.

You can set timings, dividers, and more. Try them out, great programs. ;-)

#515671 by Victor2 (Power User) at 2006-01-17 22:02:20 (7 years ago) - [Report]

Hello. I am a total n00b in overclocking.
I want to overclock my Celeron 2.4 Ghz to 3 Ghz. How can i do that and what programs do i need? Do i need better cooling too? My CPU fan is the stock fan and its pretty good.

#516442 by unknown[91892] at 2006-01-18 21:32:41 (7 years ago) - [Report]

Doesn't really matter how much you overclock a Celeron, it's still going to be crap. :rofl:

#516768 by Victor2 (Power User) at 2006-01-19 04:20:35 (7 years ago) - [Report]

Eezee wrote:

Doesn't really matter how much you overclock a Celeron, it's still going to be crap. :rofl:

Ok l0l. But how do OC a CPU ? My is MSI which supports OCing (i think)

Last edited by Victor2 at 2006-01-19 04:21:10

#516792 by unknown[28578] at 2006-01-19 05:46:31 (7 years ago) - [Report]

hi guys! i have an Asus A7N8X-Deluxe Motherboard, and an Athlon XP 2600+ with a Scythe aftermarket cooler on it.

i was wondering if it was possible to overclock it to the speeds of a 3200 or so...right now, at stock, it runs at 2.0Ghz....

the friend who gave this to me, said that it couldnt erally overclock, but i was wondering if it was possible.

my RAM is 1 GB (2x512) PC2700 and one stick is value RAM, the other is PQI....due to this, should i even bother OCing or not?

#517732 by unknown[10989] at 2006-01-20 10:54:09 (7 years ago) - [Report]

dooger wrote:

Nope, you wont get 3200 speeds unless you get God him self to help you out cuz you need a friggen miracle with that RAM and that motherboard.

#517757 by demagh (User) at 2006-01-20 11:46:40 (7 years ago) - [Report]

try setting the timings of the ram like 3-3-3-8 if u can see something like this in the bios

or download a modded bios to set CPC to T2 instead of T1 --> yup there are many for 462 platform

then try raising ur frequency from 333 to something higher .. if it didnt respont .. reset bios defaults and just live with ur system

p.s: if u got sata hdds .. consider overclocking again cuz probably their frequencies wont be locked and will mess up ur system files

This topic has been autolocked for inactivity. If you have something to add, Click Here to request it is re-opened.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
<< Prev Next >>

This topic is locked; no new posts are allowed.